Instruments Umpf Club

Umpf Club on a Stream Deck +

Select a Umpf Club in the rack and the deck shows its controls: 18 pages and 207 parameters, built from Umpf Club's Remote parameters.

Full version Reason Remote 1.4.0 · Lite 1.3.0

Stream Deck + only (it needs the four dials) · Windows 10 or later · Reason 12 or later, or Reason Recon · about 20 minutes of setup, once

Back
Drum1
Drum2
Drum3
Drum4
Master
Chop
Groups
Touch strip: Volume, Patch, Pitch, Mod
  1. Dial 1Volume
  2. Dial 2Patch
  3. Dial 3Pitch
  4. Dial 4Mod
Umpf Club landing page. Back goes to the hub

Landing dials#

The landing page opens on Volume, Patch, Pitch and Mod. Each dial has more banks behind it: press and turn a dial to step through them. Umpf Club has 8 banks. Where a cell lists more than one parameter, tap it on the strip to choose which one the dial turns. See dial banks.

BankDial 1Dial 2Dial 3Dial 4
1Master VolumeSelect PatchPitch BendMod Wheel
2Drum 1 Volume / 2 Volume / 3 Volume / 4 VolumeBeat Chop Repeat Chance / Reverse Chance / Repitch Chance / Gate ChanceDrum 1 Pitch / 2 Pitch / 3 Pitch / 4 PitchDelay Time / Synced Time / Feedback
3Drum 5 Volume / 6 Volume / 7 Volume / 8 VolumeDrum 1 Chop Amount / 2 Chop Amount / 3 Chop Amount / 4 Chop AmountDrum 5 Pitch / 6 Pitch / 7 Pitch / 8 PitchLFO 1 Rate / Synced Rate / Amount 1 / Amount 2
4Drum 1 Pan / 2 Pan / 3 Pan / 4 PanDrum 5 Chop Amount / 6 Chop Amount / 7 Chop Amount / 8 Chop AmountDrum 1 Hold / 2 Hold / 3 Hold / 4 HoldLFO 2 Rate / Synced Rate / Amount 1 / Amount 2
5Drum 5 Pan / 6 Pan / 7 Pan / 8 PanDrum 1 Delay Amount / 2 Delay Amount / 3 Delay Amount / 4 Delay AmountDrum 5 Hold / 6 Hold / 7 Hold / 8 HoldLFO 1 Amount 3 / 2 Amount 3
6Chop Output Level / Delay Output Level / Reverb Output Level / Reverb To CompressorDrum 5 Delay Amount / 6 Delay Amount / 7 Delay Amount / 8 Delay AmountDrum 1 Release / 2 Release / 3 Release / 4 ReleaseMod Matrix Amount 1 / 2 / 3
7Compressor Output Level / Clean Output LevelDrum 1 Reverb Amount / 2 Reverb Amount / 3 Reverb Amount / 4 Reverb AmountDrum 5 Release / 6 Release / 7 Release / 8 ReleaseCompressor Ratio / Threshold / Sidechain On
8–Drum 5 Reverb Amount / 6 Reverb Amount / 7 Reverb Amount / 8 Reverb Amount–Beat Chop Gate Length

Pages#

The keys on the landing page open Umpf Club's sections. The Groups key opens Drums 5-8, FX, LFO, Mod Matrix and Global. Each page puts that section's controls on the four dials, labelled with the parameter names Reason gives its Remote protocol. Switch keys light up when the setting is on.

Inside Groups

PageDial 1Dial 2Dial 3Dial 4
Drums 5-8Drum 1 Volume / 2 VolumeDrum 3 Volume / 4 VolumeDrum 5 Volume / 6 VolumeDrum 7 Volume / 8 Volume
Mod MatrixMod Matrix Amount 1Mod Matrix Amount 2Mod Matrix Amount 3–
GlobalBreath ControlExpressionSustain PedalAftertouch

Inside Groups › FX

PageDial 1Dial 2Dial 3Dial 4Keys
CompCompressor RatioCompressor Threshold––Side
DelayDelay TimeDelay Synced TimeDelay Feedback––
MixChop Output LevelDelay Output LevelReverb Output LevelCompressor Output Level / Clean Output LevelRevCmp

From the landing keys

PageDial 1Dial 2Dial 3Dial 4Keys
ChopBeat Chop Repeat Chance / Reverse Chance / Repitch Chance / Gate ChanceBeat Chop Gate Length–––
MasterMaster Volume–––Rec
Drum1Drum 1 Volume / Hold / Release / PitchDrum 1 Chop Amount / Delay Amount / Reverb Amount / PanDrum 1 Hi Cut Freq / Lo Cut Freq / Crush Sample Rate / Crush Bit DepthDrum 1 Dist Drive / Env Filter Freq / Env Filter Resonance / Env Filter AmountMute Solo Comp Clean Filt
Drum2Drum 2 Volume / Hold / Release / PitchDrum 2 Chop Amount / Delay Amount / Reverb Amount / PanDrum 2 Hi Cut Freq / Lo Cut Freq / Crush Sample Rate / Crush Bit DepthDrum 2 Dist Drive / Env Filter Freq / Env Filter Resonance / Env Filter AmountMute Solo Comp Clean Filt
Drum3Drum 3 Volume / Hold / Release / PitchDrum 3 Chop Amount / Delay Amount / Reverb Amount / PanDrum 3 Hi Cut Freq / Lo Cut Freq / Crush Sample Rate / Crush Bit DepthDrum 3 Dist Drive / Env Filter Freq / Env Filter Resonance / Env Filter AmountMute Solo Comp Clean Filt
Drum4Drum 4 Volume / Hold / Release / PitchDrum 4 Chop Amount / Delay Amount / Reverb Amount / PanDrum 4 Hi Cut Freq / Lo Cut Freq / Crush Sample Rate / Crush Bit DepthDrum 4 Dist Drive / Env Filter Freq / Env Filter Resonance / Env Filter AmountMute Solo Comp Clean Filt

Inside Groups › LFO

PageDial 1Dial 2Dial 3Dial 4
LFO 1LFO 1 RateLFO 1 Synced RateLFO 1 Amount 1LFO 1 Amount 2 / 3
LFO 2LFO 2 RateLFO 2 Synced RateLFO 2 Amount 1LFO 2 Amount 2 / 3

Inside Groups › Drums 5-8

PageDial 1Dial 2Dial 3Dial 4Keys
Drum5Drum 5 Volume / Hold / Release / PitchDrum 5 Chop Amount / Delay Amount / Reverb Amount / PanDrum 5 Hi Cut Freq / Lo Cut Freq / Crush Sample Rate / Crush Bit DepthDrum 5 Dist Drive / Env Filter Freq / Env Filter Resonance / Env Filter AmountMute Solo Comp Clean Filt
Drum6Drum 6 Volume / Hold / Release / PitchDrum 6 Chop Amount / Delay Amount / Reverb Amount / PanDrum 6 Hi Cut Freq / Lo Cut Freq / Crush Sample Rate / Crush Bit DepthDrum 6 Dist Drive / Env Filter Freq / Env Filter Resonance / Env Filter AmountMute Solo Comp Clean Filt
Drum7Drum 7 Volume / Hold / Release / PitchDrum 7 Chop Amount / Delay Amount / Reverb Amount / PanDrum 7 Hi Cut Freq / Lo Cut Freq / Crush Sample Rate / Crush Bit DepthDrum 7 Dist Drive / Env Filter Freq / Env Filter Resonance / Env Filter AmountMute Solo Comp Clean Filt
Drum8Drum 8 Volume / Hold / Release / PitchDrum 8 Chop Amount / Delay Amount / Reverb Amount / PanDrum 8 Hi Cut Freq / Lo Cut Freq / Crush Sample Rate / Crush Bit DepthDrum 8 Dist Drive / Env Filter Freq / Env Filter Resonance / Env Filter AmountMute Solo Comp Clean Filt

How it follows#

Select a Umpf Club in the rack and the Reason Remote codec, installed during setup, tells the plugin which device has focus. The deck opens Umpf Club's landing page, and values go both ways: turn a dial and Umpf Club moves, change a control in Reason and the touch strip follows.

Which edition#

Umpf Club is in Reason Remote ($20), which follows all 27 devices. It is not in Lite: select one with Lite installed and the deck shows a page saying the full version covers it. Lite vs full.

New to the deck? Getting started covers setup, and Instrument pages explains landing pages, sections and folders.