Instruments NN-19

NN-19 on a Stream Deck +

Select an NN-19 in the rack and the deck shows its controls: 8 pages and 53 parameters, built from NN-19's Remote parameters.

Full version Reason Remote 1.4.0 · Lite 1.3.0

Stream Deck + only (it needs the four dials) · Windows 10 or later · Reason 12 or later, or Reason Recon · about 20 minutes of setup, once

Back
Global
Osc
LFO
Filter
Amp
Groups
Touch strip: Volume, Patch, Pitch, Mod
  1. Dial 1Volume
  2. Dial 2Patch
  3. Dial 3Pitch
  4. Dial 4Mod
NN-19 landing page. Back goes to the hub

Landing dials#

The landing page opens on Volume, Patch, Pitch and Mod. Each dial has more banks behind it: press and turn a dial to step through them. NN-19 has 5 banks. Where a cell lists more than one parameter, tap it on the strip to choose which one the dial turns. See dial banks.

BankDial 1Dial 2Dial 3Dial 4
1Master LevelSelect PatchPitch BendMod Wheel
2Amp Env Attack / Decay / Sustain / ReleaseFilter FreqOsc Octave / Semitone / Fine TuneLFO Rate / Amount / Wave / Sync Enable
3Amp Vel Amount / Amp Attack Vel Amount / Sample Start Vel AmountFilter Res / Mode / On/Off / Kbd TrackSample Start / High Quality Interpolation / Osc Env Amount / Osc Kbd TrackLFO Dest
4Stereo Spread / Spread ModeFilter Env Attack / Decay / Sustain / ReleasePortamento / Polyphony / Key Mode / Pitch Bend RangeFilter Freq Mod Wheel Amount / Filter Res Mod Wheel Amount / Filter Decay Mod Wheel Amount / Amp Mod Wheel Amount
5–Filter Env Amount / Env Invert / Env Vel Amount / Decay Vel AmountLow Bandwidth On/Off / Solo SampleLFO Mod Wheel Amount / Ext Mod Select / Filter Freq Ext Mod / LFO Ext Mod

Pages#

The keys on the landing page open NN-19's sections. The Groups key opens Ctrl, Mod and Vel. Each page puts that section's controls on the four dials, labelled with the parameter names Reason gives its Remote protocol. Switch keys light up when the setting is on.

From the landing keys

PageDial 1Dial 2Dial 3Dial 4
GlobalPortamento / PolyphonyStereo Spread / Spread ModeLow Bandwidth On/Off / Key ModePitch Bend Range / Solo Sample
OscSample Start / High Quality InterpolationOsc Octave / SemitoneOsc Fine TuneOsc Env Amount / Kbd Track
LFOLFO RateLFO AmountLFO WaveLFO Dest / Sync Enable
FilterFilter Freq / ResFilter Mode / On/Off / Kbd TrackFilter Env Attack / DecayFilter Env Sustain / Release / Amount / Invert
AmpMaster LevelAmp Env AttackAmp Env DecayAmp Env Sustain / Release

Inside Groups

PageDial 1Dial 2Dial 3Dial 4
CtrlExt Mod SelectFilter Freq Ext ModLFO Ext ModAmp Ext Mod
ModFilter Freq Mod Wheel AmountFilter Res Mod Wheel AmountFilter Decay Mod Wheel Amount / Amp Mod Wheel AmountLFO Mod Wheel Amount
VelFilter Env Vel AmountFilter Decay Vel AmountAmp Vel Amount / Attack Vel AmountSample Start Vel Amount

How it follows#

Select an NN-19 in the rack and the Reason Remote codec, installed during setup, tells the plugin which device has focus. The deck opens NN-19's landing page, and values go both ways: turn a dial and NN-19 moves, change a control in Reason and the touch strip follows.

Which edition#

NN-19 is in Reason Remote ($20), which follows all 27 devices. It is not in Lite: select one with Lite installed and the deck shows a page saying the full version covers it. Lite vs full.

New to the deck? Getting started covers setup, and Instrument pages explains landing pages, sections and folders.