Instruments SubTractor

SubTractor on a Stream Deck +

Select a SubTractor in the rack and the deck shows its controls: 13 pages and 85 parameters, built from SubTractor's Remote parameters.

Full and Lite Reason Remote 1.4.0 · Lite 1.3.0

Stream Deck + only (it needs the four dials) · Windows 10 or later · Reason 12 or later, or Reason Recon · about 20 minutes of setup, once

Back
Osc 1
Osc 2
Filter
Flt Env
Amp Env
Global
Mod/LFO
Touch strip: Volume, Patch, Pitch, Mod
  1. Dial 1Volume
  2. Dial 2Patch
  3. Dial 3Pitch
  4. Dial 4Mod
SubTractor landing page. Back goes to the hub

Landing dials#

The landing page opens on Volume, Patch, Pitch and Mod. Each dial has more banks behind it: press and turn a dial to step through them. SubTractor has 8 banks. Where a cell lists more than one parameter, tap it on the strip to choose which one the dial turns. See dial banks.

BankDial 1Dial 2Dial 3Dial 4
1Master LevelSelect PatchPitch BendMod Wheel
2Pitch Bend RangeKey Mode / PortamentoNoise On/Off / Decay / Color / LevelPolyphony
3Filter Freq / Res / Type / Kbd TrackFilter2 Freq / ResMod Env SustainFilter Freq Mod Wheel Amount / Filter Res Mod Wheel Amount / LFO1 Mod Wheel Amount / Phase Diff Mod Wheel Amount
4Filter Link Freq On/Off / Filter2 On/OffMod Env DecayFilter Env InvertFM Mod Wheel Amount
5Mod Env Attack / Filter Env Attack / Filter Env DecayFilter Env Sustain / ReleaseAmp Env SustainMod Env Release
6Amp Env AttackAmp Env DecayFM AmountFilter Env Amount
7Osc1 Phase Mode / Phase Diff / WaveOsc1 Octave / Semitone / Fine TuneFM Amount / Osc2 On/OffAmp Env Release
8Osc2 Phase Mode / Phase Diff / WaveOsc2 Octave / Semitone / Fine Tune–Osc Mix / Osc2 Kbd Track / Ring Mod

Pages#

The keys on the landing page open SubTractor's sections. The Mod/LFO key opens Mix/Noise, Mod Env, LFO 1, LFO 2, Mod Wheel, Ext Mod and Velocity. Each page puts that section's controls on the four dials, labelled with the parameter names Reason gives its Remote protocol. Switch keys light up when the setting is on.

Back
Osc 1
Osc 2
Filter
Flt Env
Amp Env
Global
Mod/LFO
  1. Dial 1Wave
  2. Dial 2Oct · Semi
  3. Dial 3Cent · Mode
  4. Dial 4Phase · Kbd
SubTractor Osc 1 page. The current section pulses

From the landing keys

PageDial 1Dial 2Dial 3Dial 4
Osc 1Osc1 WaveOsc1 Octave / SemitoneOsc1 Fine Tune / Phase ModeOsc1 Phase Diff / Kbd Track
Osc 2Osc2 On/Off / WaveOsc2 Octave / SemitoneOsc2 Fine Tune / Phase ModeOsc2 Phase Diff / Kbd Track
FilterFilter Freq / ResFilter Kbd Track / TypeFilter Link Freq On/Off / Filter2 On/OffFilter2 Freq / Res
Flt EnvFilter Env AttackFilter Env DecayFilter Env Sustain / ReleaseFilter Env Amount / Invert
Amp EnvAmp Env AttackAmp Env DecayAmp Env SustainAmp Env Release / Master Level
GlobalPortamentoPolyphonyKey ModeLow Bandwidth On/Off / Pitch Bend Range

Inside Mod/LFO

PageDial 1Dial 2Dial 3Dial 4
Mix/NoiseOsc MixFM Amount / Ring ModNoise On/Off / LevelNoise Decay / Color
Mod EnvMod Env AttackMod Env Decay / SustainMod Env Release / GainMod Env Dest / Invert
LFO 1LFO1 RateLFO1 AmountLFO1 WaveLFO1 Dest / LFO Sync Enable
LFO 2LFO2 RateLFO2 AmountLFO2 DelayLFO2 Dest / Kbd Track
Mod WheelFilter Freq Mod Wheel AmountFilter Res Mod Wheel AmountFM Mod Wheel AmountPhase Diff Mod Wheel Amount / LFO1 Mod Wheel Amount
Ext ModFilter Freq Ext ModLFO1 Ext ModAmp Ext ModFM Ext Mod / Ext Mod Select
VelocityAmp Vel Amount / FM Vel AmountMod Env Vel Amount / Phase Vel AmountFilter2 Freq Vel Amount / Filter Env Vel AmountFilter Decay Vel Amount / Mix Vel Amount / Amp Attack Vel Amount

How it follows#

Select a SubTractor in the rack and the Reason Remote codec, installed during setup, tells the plugin which device has focus. The deck opens SubTractor's landing page, and values go both ways: turn a dial and SubTractor moves, change a control in Reason and the touch strip follows.

Which edition#

SubTractor is in both editions: free in Reason Remote Lite, which follows 8 devices, and in Reason Remote ($20), which follows all 27. The pages below are the same in both.

New to the deck? Getting started covers setup, and Instrument pages explains landing pages, sections and folders.